 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AOD407 P-Channel Enhancement Mode Field Effect Transistor General Description The AOD407 uses advanced trench technology to provide excellent RDS(ON), low gate charge and low gate resistance. With the excellent thermal resistance of the DPAK package, this device is well suited for high current load applications. Standard Product AOD407 is Pb-free (meets ROHS & Sony 259 specifications). AOD407L is a Green Product ordering option. AOD407 and AOD407L are electrically identical. TO-252 D-PAK Features VDS (V) = -60V ID = -12A (VGS = -10V) RDS(ON) < 115m (VGS = -10V) RDS(ON) < 150m (VGS = -4.5V) D Top View Drain Connected to Tab G S G D S Absolute Maximum Ratings TA=25C unless otherwise noted Parameter Symbol VDS Drain-Source Voltage VGS Gate-Source Voltage Continuous Drain Current G Pulsed Drain Current Avalanche Current C C C Maximum -60 20 -12 -10 -30 -12 23 50 25 2.5 1.6 -55 to 175 Units V V A A mJ W W C TC=25C TC=100C ID IDM IAR EAR PD PDSM TJ, TSTG TC=25C Repetitive avalanche energy L=0.1mH Power Dissipation B Power Dissipation A TC=100C TA=25C TA=70C Junction and Storage Temperature Range Thermal Characteristics Parameter Maximum Junction-to-Ambient A Maximum Junction-to-Ambient A Maximum Junction-to-Case B Symbol t 10s Steady-State Steady-State RJA RJC Typ 16.7 40 2.5 Max 25 50 3 Units C/W C/W C/W Alpha & Omega Semiconductor, Ltd. AOD407 Electrical Characteristics (TJ=25C unless otherwise noted) Symbol Parameter Conditions ID=-250A, VGS=0V VDS=-48V, VGS=0V TJ=55C VDS=0V, VGS=20V VDS=VGS ID=-250A VGS=-10V, VDS=-5V VGS=-10V, ID=-12A RDS(ON) gFS VSD IS Static Drain-Source On-Resistance VGS=-4.5V, ID=-8A Forward Transconductance VDS=-5V, ID=-12A IS=-1A,VGS=0V Diode Forward Voltage Maximum Body-Diode Continuous Current TJ=125C -1.5 -30 91 150 114 12.8 -0.76 -1 -12 987 VGS=0V, VDS=-30V, f=1MHz VGS=0V, VDS=0V, f=1MHz 114 46 7 15.8 VGS=-10V, VDS=-30V, ID=-12A 7.4 3 3.5 9 VGS=-10V, VDS=-30V, RL=2.5, RGEN=3 IF=-12A, dI/dt=100A/s 10 25 11 27.5 30 35 10 20 9 1185 150 115 -2.1 Min -60 -0.003 -1 -5 100 -3 Typ Max Units V A nA V A m m S V A pF pF pF nC nC nC nC ns ns ns ns ns nC STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage IDSS IGSS VGS(th) ID(ON) Zero Gate Voltage Drain Current Gate-Body leakage current Gate Threshold Voltage On state drain current DYNAMIC PARAMETERS Ciss Input Capacitance Coss Crss Rg Output Capacitance Reverse Transfer Capacitance Gate resistance SWITCHING PARAMETERS Qg(10V) Total Gate Charge (10V) Qg(4.5V) Total Gate Charge (4.5V) Qgs Qgd tD(on) tr tD(off) tf trr Qrr Gate Source Charge Gate Drain Charge Turn-On DelayTime Turn-On Rise Time Turn-Off DelayTime Turn-Off Fall Time Body Diode Reverse Recovery Time Body Diode Reverse Recovery Charge IF=-12A, dI/dt=100A/s A: The value of R qJA is measured with the device mounted on 1in 2 FR-4 board with 2oz. Copper, in a still air environment with T A =25C. The Power dissipation PDSM is based on R qJA and the maximum allowed junction temperature of 150C. The value in any given application depends on the user's specific board design, and the maximum temperature of 175C may be used if the PCB allows it. B. The power dissipation PD is based on TJ(MAX)=175C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C: Repetitive rating, pulse width limited by junction temperature TJ(MAX)=175C. D. The R qJA is the sum of the thermal impedence from junction to case R qJC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300 ms pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-case thermal impedence which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of TJ(MAX)=175C. G. The maximum current rating is limited by bond-wires. H. These tests are performed with the device mounted on 1 in 2 FR-4 board with 2oz. Copper, in a still air environment with TA=25C. The SOA curve provides a single pulse rating. Rev 5 : June 2005 THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE Alpha & Omega Semiconductor, Ltd. AOD407 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 30 25 20 -ID (A) -ID(A) -4.5V 15 10 5 0 0 1 2 3 4 5 -VDS (Volts) Fig 1: On-Region Characteristics 220 Normalized On-Resistance 200 180 RDS(ON) (m) 160 140 120 100 80 0 15 20 25 -ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage 5 10 0.8 0 25 50 75 100 125 150 175 Temperature (C) Figure 4: On-Resistance vs. Junction Temperature VGS=-10V VGS=-4.5V 2 1.8 1.6 1.4 1.2 1 VGS=-4.5V ID=-8A VGS=-10V ID=-12A -3.5V -3V 0 0 1 2 3 4 5 -VGS(Volts) Figure 2: Transfer Characteristics 2 VGS=-4V 6 125C 4 25C -7V -10V 10 -6V -5V 8 VDS=-5V 300 ID=-12A 250 125C RDS(ON) (m) -IS (A) 200 1.0E+01 1.0E+00 1.0E-01 1.0E-02 1.0E-03 1.0E-04 1.0E-05 1.0E-06 2 4 6 8 10 0.0 0.2 0.4 0.6 0.8 1.0 1.2 -VSD (Volts) Figure 6: Body-Diode Characteristics 125C 150 100 25C 25C 50 -VGS (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage Alpha & Omega Semiconductor, Ltd. AOD407 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 10 VDS=-30V ID=-12A A 1200 Ciss 8 -VGS (Volts) 1000 Capacitance (pF) 800 600 400 Coss 200 0 0 8 12 -Qg (nC) Figure 7: Gate-Charge Characteristics 4 16 0 15 20 25 -VDS (Volts) Figure 8: Capacitance Characteristics 5 10 30 Crss 6 4 2 0 100.0 TJ(Max)=175C, TA=25C 10s 200 160 Power (W) 120 80 40 TJ(Max)=175C TA=25C -ID (Amps) 10.0 RDS(ON) limited 1ms 100s 10ms 1.0 DC 0.1 0.1 1 -VDS (Volts) Figure 9: Maximum Forward Biased Safe Operating Area (Note F) 10 ZJC Normalized Transient Thermal Resistance 10 100 0 0.0001 0.001 0.01 0.1 1 10 Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toCase (Note F) D=Ton/T TJ,PK=TC+PDM.ZJC.RJC RJC=3C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 1 0.1 PD Ton Single Pulse T 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 100 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance (Note F) Alpha & Omega Semiconductor, Ltd. AOD407 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 14 -ID(A), Peak Avalanche Current 60 12 Power Dissipation (W) tA = L ID BV - V DD 50 40 30 20 10 0 10 8 TA=25C 6 0.00001 0.0001 0.001 0 25 50 75 100 125 150 175 Time in avalanche, tA (s) Figure 12: Single Pulse Avalanche capability TCASE (C) Figure 13: Power De-rating (Note B) 14 12 Current rating -ID(A) 10 8 6 4 2 0 0 25 50 75 100 125 150 175 TCASE (C) Figure 14: Current De-rating (Note B) Power (W) 60 50 40 30 20 10 0 0.001 TA=25C 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 15: Single Pulse Power Rating Junction-toAmbient (Note H) 10 ZJA Normalized Transient Thermal Resistance 1 D=Ton/T TJ,PK=TA+PDM.ZJA.RJA RJA=50C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 0.1 PD Single Pulse Ton 0.01 T 100 1000 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 Pulse Width (s) Figure 16: Normalized Maximum Transient Thermal Impedance (Note H) Alpha & Omega Semiconductor, Ltd. |
Price & Availability of AOD407
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |